FlashPro-ARM and GangPro-ARM Device List Overview

These devices can be programmed by all adapters:

Texas Instruments - MSP432, TIVA, Stellaris, SimpleLink(ARM only)
ST Microelectronics - STM32 Fx, Lx, Gx, Hx, BlueNRG, WB, WL, Ux
Silicon Labs - EFM32, EFR32, EM, SiM3
Silergy - MAX7xxxx
Renesas - Synergy, RA
NXP / Freescale - i.MX RT, Kinetis, LPC, S32, K32
Nordic Semiconductors - nRF
Microchip/Atmel - SMART SAMx
Maxim - MAX32xxx
Marvell - 88M
GigaDevice - GD32-E23x
Infineon / Cypress - FM0+, FM3, FM4, PSoC 4, PSoC 5LP, PSoC 6, PSoCAn, IMC
Analog Devices - Precision
Active Semi - PAC5x

Serial Flash Support Overview
Using FlashPro-ARM and GangPro-ARM software the XStreamPro-Iso adapter can use the target MCU (i.e. STM32H7) as a proxy to program these serial external flash devices over JTAG/SWD, as long as the external flash device is properly configured using the MCU’s SPI peripheral interface, such as OCTOSPI, Dual-QSPI, QSPI, SPI, etc.

NOR memory:
Adesto
Cypress
GigaDevice
ISSI
Macronix
Microchip
Micron
Winbond 

Serial Flash memory can be programmed directly via SPI using FlashPro-M or GangPro-M software.

25-January-2024
==================================================================
version 2.84  
  Added TI MSPM0 protection support
  Added support for NXP LPC86x, LPC11xxLV, LPC15xx, QN908x families
  Added STM32H503 OTP, Option Bytes, and DA-PWD support
  Added STM32H56x/7x programming, provisioning and DA support 
  Added STM32H56x/7x external flash SPI support
  Added SiLabs EFR32xG22/23/24
  Patch to STM32F0 standalone mode
  Patch to Labview demo