FlashPro-ARM and GangPro-ARM Device List Overview

These devices can be programmed by all adapters:

Texas Instruments - MSP432, TIVA, Stellaris, SimpleLink(ARM only)
ST Microelectronics - STM32 Fx, Lx, Gx, Hx, BlueNRG, WB, WL, Ux
Silicon Labs - EFM32, EFR32, EM, SiM3
Silergy - MAX7xxxx
Renesas - Synergy, RA
NXP / Freescale - i.MX RT, Kinetis, LPC, S32, K32
Nordic Semiconductors - nRF
Microchip/Atmel - SMART SAMx
Maxim - MAX32xxx
Marvell - 88M
GigaDevice - GD32-E23x
Infineon / Cypress - FM0+, FM3, FM4, PSoC 4, PSoC 5LP, PSoC 6, PSoCAn, IMC
Analog Devices - Precision
Active Semi - PAC5x

Serial Flash Support Overview
Using FlashPro-ARM and GangPro-ARM software the XStreamPro-Iso adapter can use the target MCU (i.e. STM32H7) as a proxy to program these serial external flash devices over JTAG/SWD, as long as the external flash device is properly configured using the MCU’s SPI peripheral interface, such as OCTOSPI, Dual-QSPI, QSPI, SPI, etc.

NOR memory:
Adesto
Cypress
GigaDevice
ISSI
Macronix
Microchip
Micron
Winbond 

Serial Flash memory can be programmed directly via SPI using FlashPro-M or GangPro-M software.

4-March-2024
==================================================================
version 2.85
  Added SiLabs EFR32 x24/27/28 families with SE Mailbox support
  Added STM32H5 DA unlock procedure
  Added Renesas RA6T3 family
  Added NXP S32K3 family
  Added TI MSPM0C family
  Patch for upper bank segment erase in some STM32U5 MCUs