FlashPro-ARM and GangPro-ARM Device List Overview

These devices can be programmed by all adapters:

Texas Instruments - MSP (ARM), TIVA, Stellaris, SimpleLink(ARM)
ST Microelectronics - STM32 Fx, Lx, Gx, Hx, WB, WL, Ux, BlueNRG
Silicon Labs - EFM32, EFR32, EM, SiM3
Silergy - MAX7xxxx
Renesas - Synergy, RA
NXP / Freescale - i.MX RT, Kinetis, LPC, S32, K32
Nordic Semiconductors - nRF
Microchip/Atmel - SMART SAMx
Maxim - MAX32xxx
Marvell - 88M
GigaDevice - GD32-E23x
Infineon / Cypress - FM0+, FM3, FM4, PSoC 4, PSoC 5LP, PSoC 6, PSoCAn, IMC
Analog Devices - Precision
Active Semi - PAC5x

Serial Flash Support Overview
Using FlashPro-ARM and GangPro-ARM software the XStreamPro-Iso adapter can use the target MCU (i.e. STM32H7) as a proxy to program these serial external flash devices over JTAG/SWD, as long as the external flash device is properly configured using the MCU’s SPI peripheral interface, such as OCTOSPI, Dual-QSPI, QSPI, SPI, etc.

NOR memory:
Adesto
Cypress
GigaDevice
ISSI
Macronix
Microchip
Micron
Winbond 

Serial Flash memory can be programmed directly via SPI using FlashPro-M or GangPro-M software.

7-May-2024
==================================================================
version 2.86
  Added CC23xx support for FlashPro-ARM
  Added SiLabs EFR32xG2x SPI external flash support
  Added DLL functions for modifying string parameters F_Get_String_Config_Name_List, F_Get_String_Config_Value_By_Name, F_Set_String_Config_Value_By_Name
  Added SST26 support
  Added GangPro-ARM target 7/8 options for S-GANG integration
  Added new STM32 MCU part numbers to supported list of existing families
  Patch for Nordic nRF52 init procedure
  Patch for Qorvo PAC5222
  Patch for MSPM0 low-power mode
  Increased Report window history for GUI/DLL to 20k characters.
  Update for STM32H5 DA regression for GangPro-ARM software
  Update for Standalone GUI window patches for button interactivity
  Update for SiLabs SE for EFR32xG2x
  Update for SiLabs for clear locked device (avoid erasing UD when "Flash Memory only" option selected in Memory Options)