FlashPro-ARM and GangPro-ARM Device List Overview

These devices can be programmed by all adapters:

Texas Instruments - MSP (ARM), TIVA, Stellaris, SimpleLink(ARM)
ST Microelectronics - STM32 Fx, Lx, Gx, Hx, WB, WL, Ux, BlueNRG
Silicon Labs - EFM32, EFR32, EM, SiM3
Silergy - MAX7xxxx
Renesas - Synergy, RA
NXP / Freescale - i.MX RT, Kinetis, LPC, S32, K32
Nordic Semiconductors - nRF
Microchip/Atmel - SMART SAMx
Maxim - MAX32xxx
Marvell - 88M
GigaDevice - GD32-E23x
Infineon / Cypress - FM0+, FM3, FM4, PSoC 4, PSoC 5LP, PSoC 6, PSoCAn, IMC
Analog Devices - Precision
Active Semi - PAC5x

Serial Flash Support Overview
Using FlashPro-ARM and GangPro-ARM software the XStreamPro-Iso adapter can use the target MCU (i.e. STM32H7) as a proxy to program these serial external flash devices over JTAG/SWD, as long as the external flash device is properly configured using the MCU’s SPI peripheral interface, such as OCTOSPI, Dual-QSPI, QSPI, SPI, etc.

NOR memory:
Adesto
Cypress
GigaDevice
ISSI
Macronix
Microchip
Micron
Winbond 

Serial Flash memory can be programmed directly via SPI using FlashPro-M or GangPro-M software.

31-December-2024
==================================================================
version 2.90
  *Added support for S-GANG*
  S-GANG standalone GO button will only work if GUI is turned off
  Added SiLabs SPI by proxy support for programming external flash for more families (now including EFM32PG2x, EFR32xG2x, and EFR32xG1x).
  Added STM32U0 family
  Added F_ReadSTM32Certificate file function to DLL for ST SFI
  Added ST BlueNRG family 
  Added CC23xx checksum option 
  Added SRAM zeroing for MSPM0 after flashing
  Patch for MemViewer file save
  Patch for NXP MK id check
  Patch for NXP MKE02 gang programming
  Patch for SiLabs SE programming - added workaround to work with software reset only. Fixed issue when secure store path was incorrect.
  Patch for ST SFI - displaying correct comm frequency at the end of SFI programming.
  Patch for ST H75x SFI programming.
  Patch for MSPM0C gang initialization
  Patch for MSPM0 - added password authentication
  Patch for MSPM0 - removed option to skip deletion of empty pages.
  Patch for MSPM0 - NONMAIN default bytes will be programmed if CRC does not match when sending user NONMAIN block
  Patch for Renesas MCU ID
  Patch for standalone functionality
  Longer DLL history for report message