FlashPro-ARM and GangPro-ARM Device List Overview

These devices can be programmed by all adapters:

Texas Instruments - MSP (ARM), TIVA, Stellaris, SimpleLink(ARM)
ST Microelectronics - STM32 Fx, Lx, Gx, Hx, WB, WL, Ux, BlueNRG
Silicon Labs - EFM32, EFR32, EM, SiM3
Silergy - MAX7xxxx
Renesas - Synergy, RA
NXP / Freescale - i.MX RT, Kinetis, LPC, S32, K32
Nordic Semiconductors - nRF
Microchip/Atmel - SMART SAMx
Maxim - MAX32xxx
Marvell - 88M
GigaDevice - GD32-E23x
Infineon / Cypress - FM0+, FM3, FM4, PSoC 4, PSoC 5LP, PSoC 6, PSoCAn, IMC
Analog Devices - Precision
Active Semi - PAC5x

Serial Flash Support Overview
Using FlashPro-ARM and GangPro-ARM software the XStreamPro-Iso adapter can use the target MCU (i.e. STM32H7) as a proxy to program these serial external flash devices over JTAG/SWD, as long as the external flash device is properly configured using the MCU’s SPI peripheral interface, such as OCTOSPI, Dual-QSPI, QSPI, SPI, etc.

NOR memory:
Adesto
Cypress
GigaDevice
ISSI
Macronix
Microchip
Micron
Winbond 

Serial Flash memory can be programmed directly via SPI using FlashPro-M or GangPro-M software.

31-January-2025
==================================================================
version 2.91
  S-GANG firmware reloading patch
  S-GANG DLL patch
  Patch for NXP LPC54xxx external flash
  Patch for ST BlueNRG memory map and flashing
  Patch for MSPM0L nonmain memory flashing
  Added automatic CRC32 correction for CCFG memory space in CC2340 so CRC will be fixed even if missing in customer code