FlashPro-ARM and GangPro-ARM Device List Overview

These devices can be programmed by all adapters:

Texas Instruments - MSP (ARM, 430), TIVA, Stellaris, SimpleLink(ARM)
ST Microelectronics - STM32 Fx, Lx, Gx, Hx, WB, WL, Ux, Cx, BlueNRG
Silicon Labs - EFM32, EFR32, EM, SiM3
Silergy - MAX7xxxx
Renesas - Synergy, RA
NXP / Freescale - i.MX RT, Kinetis, LPC, S32, K32
Nordic Semiconductors - nRF
Microchip/Atmel - SMART SAMx
Maxim - MAX32xxx
Marvell - 88M
GigaDevice - GD32-E23x
Infineon / Cypress - FM0+, FM3, FM4, PSoC 4, PSoC 5LP, PSoC 6, PSoCAn, IMC, Traveo
Analog Devices - Precision
Active Semi - PAC5x

Serial Flash Support Overview
Using FlashPro-ARM and GangPro-ARM software the XStreamPro-Iso adapter can use the target MCU (i.e. STM32H7) as a proxy to program these serial external flash devices over JTAG/SWD, as long as the external flash device is properly configured using the MCU’s SPI peripheral interface, such as OCTOSPI, Dual-QSPI, QSPI, SPI, etc.

NOR memory:
Adesto
Cypress
GigaDevice
ISSI
Macronix
Microchip
Micron
Winbond 

Serial Flash memory can be programmed directly via SPI using FlashPro-M or GangPro-M software.

6-March-2025
==================================================================
version 2.92
  SC-GANG patches
  SC-GANG added quota to standalone images
  Added MSP430 to main project
  Added STM32C0 subfamily to existing STM32C0 list
  Added STM32U3 family
  Added External Flash ID verification in addition to regular MCU ID check.
  Patch to MSPM0 unlock procedure
  CS calculation patch for a few corner cases  
  Update to Traveo, PSoC5/6, and EF support for these families 
  Improved STM32H5 SFI support