FlashPro-M and GangPro-M Programmer - Software history 
Flash/Gang Programmer for 8-32b MCU	
      * Microchip/ATMEL         - AVR -> ATTiny, ATMega, ATXMega
      * Microchip  (FP-M only)  - PIC -> PIC-8, PIC-16, PIC-32
      * NXP                     - Coldfire V1
      * ST-Micrroelectronics    - STM8
      * Renesas - RL78
      * Adesto (NOR)
      * Cypress (NOR)
      * GigaDevice (NOR)
      * ISSI (NOR)
      * Macronix (NOR)
      * Microchip (NOR)
      * Micron (NOR)
      * Winbond (NOR)

23-May-2024
==================================================================
version 1.33
  Added encrypted Image loading from DLL (originally just supported via GUI)
  Added SST26 family
  Added elf file parsing support
  Added current measurement DLL functions that access samples history buffer (duplicating GUI Energy and Power Monitor graph), rather than just instantaneous Vcc/Icc that is received from F_Get_Power_Results
    DLL functions added: F_Get_Power_Results_Start, F_Get_Power_Results_Stop, F_Get_Power_Results_History
  Added custom register initialization options in Setup->Device Reset->Customize Register Initialization dialog.  The listed addresses will be written to with specified values right after comm (JTAG/SWD/etc.) initialization.
  Patch for ATtiny option bytes mask
  Patch for RL78 - disabled option for blank check